Embedded staff control cable routing path (3 pages)
Summary of Contents for Primus PRIMECARE PCB901
Page 1
DOC-040-2350 PCB901 Rotating Half Rail Instructions| REV 001 The information in this document is subject to change without notice. Page1...
Page 2
DOC-040-2350 PCB901 Rotating Half Rail Instructions| REV 001 PrimeCare™ PCB901 Rotating Half Rail Intended use: The rotating half rails are intended to help patients with exit from and entry to the PCB901 bed. These devices are NOT intended to be used for restraint purposes. Intended application environment: This device is intended to be used in a long term care facility, application environment 3.
Page 3
DOC-040-2350 PCB901 Rotating Half Rail Instructions| REV 001 Contents of package: Description Right side rotating assist bar 1 Left side rotating assist bar 3/8” x 2.5” square neck bolt 4 3/8” knob Left/right reference graphic: STANDARD CONVENTIONS USED DANGER Information that appears under the DANGER description concerns the protection of personnel from direct and pending hazards that, if not avoided, will result in immediate, serious personal injury or death in addition to damage of the equipment.
Page 4
Failure to comply with these instructions could result in patient/user/operator harm and or death. WARNING This device is only to be used with the Primus Medical PrimeCare™ B901 bed frame. WARNING This device rotates. When routing cables from other equipment in the medical bed, precautions shall be taken to avoid squeezing those between parts of the medical bed.
Page 5
Other manufacturers assist rails/bars may not be compatible and can lead to entrapment issues or harm to patients. Only compatible Primus Medical assist bars and rails may be used on this bed. Make sure mattress is the correct size for bed frame and the assist bars are secured to frame to decrease the risk of entrapment.
Page 6
DOC-040-2350 PCB901 Rotating Half Rail Instructions| REV 001 4. Insert the 3/8”x2.5” square neck bolts from the outside of the bed frame and install the knobs on the ends of the bolts. WARNING The knobs must be installed tightly to ensure proper mounting of the device.
Page 7
DOC-040-2350 PCB901 Rotating Half Rail Instructions| REV 001 Cleaning Instructions: WARNING If cleaning assist bars while still mounted to the bed frame, all bed frame cleaning instructions must be followed. Prior to cleaning unplug power supply cords • Sanitize and wash all components. DO NOT submerge the assist bars. •...
Page 8
DOC-040-2350 PCB901 Rotating Half Rail Instructions| REV 001 The information in this document is subject to change without notice. Page8...
Need help?
Do you have a question about the PRIMECARE PCB901 and is the answer not in the manual?
Questions and answers