Advertisement
Table of Contents
P1752_P2000_P2002_15905C Embedded Staff Control
Head end
1. Unplug the main cable. Remove the access cover on the control box. Use a standard tip
screwdriver and carefully push the tabs in to remove the cover as shown.
The information in this document is subject to change without notice.
Installation Instructions
Cable Routing Path
Control Box
P1752/P2000/P2002/15905C Embedded Staff
C ontrol. R E V 001, J u ly 2 8 th , 2 0 1 5
Foot
end
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Primus drive P1752
Summary of Contents for Primus drive P1752
- Page 1 P1752/P2000/P2002/15905C Embedded Staff C ontrol. R E V 001, J u ly 2 8 th , 2 0 1 5 Installation Instructions P1752_P2000_P2002_15905C Embedded Staff Control Cable Routing Path Head end Control Box Foot 1. Unplug the main cable. Remove the access cover on the control box. Use a standard tip screwdriver and carefully push the tabs in to remove the cover as shown.
- Page 2 P1752/P2000/P2002/15905C Embedded Staff C ontrol. R E V 001, J u ly 2 8 th , 2 0 1 5 2. Remove bypass plug from thecontrol box. Bypass plug is the one without a cord to the far right. NOTE: The bed will not function without the bypass plug or the staff control being plugged into the control box.
- Page 3 P1752/P2000/P2002/15905C Embedded Staff C ontrol. R E V 001, J u ly 2 8 th , 2 0 1 5 6. Inspect entire cable path to ensure there is no interference with any moving parts. Replace the access cover on the control box. Test all functions for proper operation using footboard control panel.
Need help?
Do you have a question about the drive P1752 and is the answer not in the manual?
Questions and answers