Scan Procedure - Canon imageFORMULA CR-80 Instructions Manual

Scan Procedure

Pull out the document feed tray.
Carefully align the edges of the document.
Load the documents with their front sides facing right and with
their edges flush against the document load mark.
36
Adjust the Eject Stopper in accordance with the document.
Instruct scanning to start from the software application.
NOTE
• When Using the Accompanying Scanning Utility for CR-50/80:
There are three scanning methods as follows. Follow the each instruction.
Scan 1 page
Click [Scan Page] from the [File] menu.
Scan Batch to File
Click [Scan Batch to File] from the [File] menu.
Input the File name, and then click [Save].
Document
Select Simplex or Duplex, and then click [Start Scanning].
Load Mark
Scan Batch to Printer
Click [Scan Batch to Printer] from the [File] menu.
Select Simplex or Duplex, and then click [Start Scanning].