NOTE: When installing the Mechanism assembly, secure
the screws (S5a) in the order of a , b .
(S5a)
<NOTE 5a>
b
a
Q3002
End sensor
<NOTE 5c>
(L5)
Spacer
<NOTE 5b>
D3001
LED
<NOTE 5c>
S3002
S cassette switch
<NOTE 5c>
Fig. D5
Procedures for Lowering the Cassette holder assembly
As the mechanism of this unit is integrated with the
Housing assembly, the holder must be lowered and
the two screws unscrewed when removing the
Mechanism assembly.
Fig. 1
(S5b)
(S5c)
FOIL SIDE
<NOTE 3c>
CN1
WR5
5
(L5)
Spacer
<NOTE 5b>
Q3001
Start sensor
<NOTE 5c>
(S6)
Turn the loading motor pulley in the direction as indicated
by Fig.2. As both A and B levers are lodged twice, push the
levers in the direction as indicated by Fig.3 to release them.
When pushing the levers, do it in the order of A , B , B , A .
When the holder has been lowered, turn the pulley until the
cassette holder is securely in place without allowing any up/
down movement.
6
CN7001
(L6)
Fig. D6
Fig. 2
Fig. 3
1-3