Specifications - Canon CanoScan 9950F Quick Start Manual

Specifications

Scanner Type
Scanning Element
Light Source
Optical Resolution
Selectable Resolution
Scanning Bit Depth
*2
Scanning Speed
(Photo or Document)
*2
Scanning Speed (Film)
*3
Preview Speed
Interface
Maximum Document Size
Film Type (negatives/positives)
Scanner Buttons
Operating Range
Power Requirements
Power Consumption
Maximum Exterior Dimensions
Weight
*1
16 bit output supported for film scanning only.
*2
The fastest speed in USB 2.0 Hi-Speed mode on Windows PC. Transfer time to computer is not included.
*3
Calibration processing time is not included.
*4
Note that Macintosh computers with USB 2.0 Hi-Speed interface expansion cards are not supported.
*5
AC adapter type varies according to the region in which the scanner is purchased.
• Specifications are subject to change without notice.
Upgrading to USB 2.0 (Windows Only)
To upgrade a computer to the USB 2.0 standard, please use one the following USB expansion cards/hubs that have been
verified by Canon for compatibility.
Expansion Cards
• Adaptec USB2connect 5100: PCI bus
• Adaptec USB2connect 3100LP: PCI bus
• Adaptec USB2connect 2000LP: PCI bus
• Adaptec DuoConnect: PCI bus
For installation procedures, please read the instructions that accompany the USB expansion card/hub.
Color
Grayscale
Color
Grayscale,B&W
Color, GrayScale,
B&W
Temperature
Humidity
CanoScan 9950F
Flatbed
CCD 6-line color
Cold cathode fluorescent lamp
4800 x 9600 dpi
25 - 19200 dpi (ScanGear CS)
16 bit input / 16 bit or 8 bit output for each color (RGB)
16 bit input / 16 bit
11.0 msec./line (2400 dpi), 11.0 msec./line (4800 dpi)
11.0 msec./line (2400 dpi), 11.0 msec./line (4800 dpi)
5.5 - 88.0 msec./line
Approximately 3.6 seconds
*4
USB 2.0 Hi-Speed / USB (USB 1.1 equivalent)
IEEE1394a (FireWire400:Macintosh only)
A4/Letter: 216 x 297 mm
35 mm strip 30 frames
35 mm slide 12 frames
120 format (max. 6 x 22 cm) 2 strips
120 format (max. 6 x 9 cm) 1 frame
4"x 5" format
4 buttons: COPY, SCAN, PDF, E-MAIL
° °
10 C to 35
10% to 90% RH, 20% to 80% RH when scanning film
(without condensation formation)
AC adapter (100/120/230/240 V)
In operation: 28 watts maximum
Stand-by: 6 watts
Power Switch Off: 0.1 watts (100V), 0.3 watts (200V)
(Using supplied AC adapter)
290 x 509 x 128 mm
Approximately 5.8 kg
Hubs
Adaptec XHUB4
Adaptec XHUB4PLUS
Adaptec XHUB7PLUS
Specifications
*1
or 8 bit output
° °
C (50 F to 95 F)
*5
17