Advertisement
Quick Links
Model # SEC17 RW U8 W/MTL KD
SEC17 RWS U8 W/MT KD
INSTALLATION MANUAL
VERANDA REGENCY RAILING WITH METAL BALUSTERS
Questions, problems, missing parts? Before returning to the store,
call Veranda Customer Service
8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday
1-800-230-7547
HOMEDEPOT.COM/VERANDA
THANK YOU
We appreciate the trust and confidence you have placed in Veranda through the purchase of this railing. We strive to continually create quality
products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you
for choosing Veranda!
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Veranda SEC17 RW U8 W/MTL KD
Summary of Contents for Veranda SEC17 RW U8 W/MTL KD
- Page 1 THANK YOU We appreciate the trust and confidence you have placed in Veranda through the purchase of this railing. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. Thank you...
-
Page 2: Table Of Contents
Table of Contents Table of Contents ........2 Line Rail Installation . -
Page 3: Warranty
Purchaser’s sole warranty and remedy is with that manufacturer. Contact the Customer Service Team at 1-800-230-7547 or visit www.HOMEDEPOT.com/VERANDA. HOMEDEPOT.COM/VERANDA Please contact 1-800-230-7547 for further assistance. -
Page 4: Pre-Installation
Pre-Installation TOOLS REQUIRED Claw Safety Tape Pencil Level hammer goggles adhesive measure Power 1/8 in. 5/32 in. Speed Adjustable Miter drill drill bit drill bit square square RAILING HARDWARE KIT LINE BALUSTER EZ MOUNT KIT Part Description Quantity (per kit) EZ Mount EZ Mount screws Part... - Page 5 □ If using post sleeve moulding, slide the post down into the cove moulding prior to securing any railings (Fig. 1). Fig. 1 □ Measure the inside distance between properly installed, plumb posts. See Fig. 2 for Line and Stair Railings. Fig. 2 For Line For Stairs HOMEDEPOT.COM/VERANDA Please contact 1-800-230-7547 for further assistance.
- Page 6 Pre-Installation (continued) □ Determine length of top and bottom rails, and cut to length. Place the top and bottom rails side-by-side for accurate placement of the EZ Mounts (JJ). Center the pattern on the rails, spacing the EZ Mounts (JJ) no more than 4.5 in. apart. Fig.
-
Page 7: Line Rail Installation
NOTE: Using extended drill bits is recommended to prevent damage to the rail, and allow a more perpendicular driving angle. □ Secure the bottom railing in place using the 2 in. screws (DD). HOMEDEPOT.COM/VERANDA Please contact 1-800-230-7547 for further assistance. - Page 8 Line Rail Installation (continued) Preparing the top rail Inserting balusters □ Position top brackets (BB) 1/32 in. – 1/16 in. from the □ Insert a baluster into the first EZ Mount (JJ) at both ends of ends of the top rail and mark the hole locations. Ensure the bottom rail and one in the middle.
- Page 9 2 in. screws (DD). DO NOT OVERTIGHTEN. NOTE: Using extended drill bits is recommended to prevent damage to the rail, and allow a more perpendicular driving angle. HOMEDEPOT.COM/VERANDA Please contact 1-800-230-7547 for further assistance.
-
Page 10: Stair Railing Installation
Stair Railing Installation SPECIAL NOTES ON STAIR RAILING The stair systems are designed for the typical angles created by an approximate 7 in. rise/11 in. run with allowance for accepted variation in components. The Regency stair system allows for a 30-34 degree stair angle. Building codes are very specific on allowable angles and widths. - Page 11 □ With the top rail fully seated, and using the top bracket as a guide, mark the location of the holes. Remove the rail before pre-drilling the holes. HOMEDEPOT.COM/VERANDA Please contact 1-800-230-7547 for further assistance.
- Page 12 Stair Railing Installation (continued) Installing the top rail Installing the caps □ Set each baluster over the bottom EZ Mounts. Secure the □ Complete the installation by installing the post cap in place. top railing using the 2 in. screws (GG). You do not need to You can use a quality exterior adhesive in order to do this, remove the plugs at the ends of the balusters.
- Page 13 Questions, problems, missing parts? Before returning to the store, call Veranda Customer Service 8 a.m. - 7 p.m., EST, Monday - Friday, 9 a.m. - 6 p.m., EST, Saturday 1-800-230-7547 HOMEDEPOT.COM/VERANDA Retain this manual for future use. VER-0119-PKG 2/17...
Need help?
Do you have a question about the SEC17 RW U8 W/MTL KD and is the answer not in the manual?
Questions and answers