Mongoose REACT E1 Owner's Manual page 14

Starting the scooter
❶ Turn the power switch on.
❷ Grip handlebars firmly with both hands.
❸ Press the throttle button and kick to start gliding. The scooter
must be moving at 3 mph (5 kph) while pressing the throttle
button to start the motor.
❷
❸
Reset button
Note: If your scooter stops or doesn't start, you may need to
reset it: Press in the reset button. Restart by turning the switch
on and off. Turn switch back on and start again.
14
❶
❶
❸
Stopping the scooter
❶ Stop pressing the hand throttle.
❷ Brake by pressing down on the rear wheel stop.
❸ Turn power switch off when not in use.
❶
❸
❷