Canon PIXMA Pro9000 Series Setup Instructions page 2

6
®
Windows Printer Driver Installation and Print Head Alignment
NOTE: The screens below refer to Windows XP
Service Pack 2 installation. Screens may differ
depending on the operating system you are
using.
1 Be sure to TURN THE PRINTER OFF before
continuing.
2 Turn on the computer and start Windows.
NOTE:
· For Windows XP or Windows 2000, log on to
Windows as a member of the Administrators group
before continuing.
· Before installing the driver, disable all anti-virus
programs and automatically loading programs.
IMPORTANT: If you see the Found New
Hardware Wizard, click Cancel, and turn off the
printer. Next, remove the USB cable connected
to your computer. Then proceed from step 3 to
install the printer driver.
3
Insert the Setup CD-ROM . The setup program
should run automatically.
NOTE: If the setup program does not run, click
Start, then Run, then type D:\Msetup4.exe,
where D is your CD-ROM drive.
4
When the main menu appears, click Easy
Install.
NOTE:
· Select Easy Install in order to install the application
software, on-screen manuals and printer driver.
Select Custom Install in order to choose the options
you would like to install.
· To install PhotoRecord, click Custom Install and
follow the instruction on the screen.
· Adobe ® Photoshop ® CS, Adobe Photoshop CS2, or
Digital Photo Professional must be installed to use
Easy-PhotoPrint Pro.
5 When the list of applications to install appears,
verify the contents, click Install, then follow the
instructions on the screen.
Move the cursor over items to display
explanations of each application below.
NOTE: Easy-PhotoPrint Pro and Adobe RGB
(1998) cannot be installed in Windows Me and
Windows 98.
Read the License Agreement and click Yes.
6
Follow the on-screen instructions to install the
software.
If a message asking for your confirmation to
restart your computer appears, click OK.
The system is restarted automatically.
7 When the Printer Connection screen appears,
ensure that the printer is connected to the
computer with the USB cable, then TURN THE
PRINTER ON. The software will begin
identifying the printer port being used.
IMPORTANT: If your computer cannot detect a
printer port, click Help and refer to the online
instructions.
If a message asking for your confirmation to
restart your computer appears, click OK.
The system is restarted automatically.
8 When the Print Head Alignment screen
appears, ensure that two sheets of letter size
paper are loaded in the Auto Sheet Feeder (top
paper feeder). Click Execute, read the message
and click Print Head Alignment.
NOTE:
· Print head alignment will take about five minutes
to complete. Do not start another operation here.
· Do not open the Top Cover while printing.
9 Print head alignment is automatically adjusted
by printing the patterns below.
NOTE: Some parts of the first pattern that is
printed will be faint.
10 After print head alignment is completed, click
Next.
11 When the Installation Results screen appears,
click Next.
12 Follow the on-screen instructions to register
your product.
13 When the Installation completed successfully
screen appears, click Exit.
If Restart is displayed, ensure the Restart the
system now (recommended) check box is
selected, then click Restart.
Part no. QT5-0114-V01 © 2006 Canon Inc. "Windows" is a trademark of Microsoft Corporation, registered in the United States and other countries. "Macintosh" and "Mac" are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
"Adobe", "Adobe Photoshop" and "Adobe RGB (1998)" are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and / or other countries. Specifications subject to change without notice. Printed in Japan.
6
®
Macintosh Printer Driver Installation and Print Head Alignment
NOTE:
· Use Mac ® OS X v.10.2.8 to 10.4.x.
· The screens below refer to Mac OS X v.10.4.x
installation. Screens may differ depending on the
operating system you are using.
· Before installing the driver, disable all anti-virus
programs and automatically loading programs.
1 Turn on your Mac and your printer and insert
the Setup CD-ROM .
If the CD-ROM folder does not open
automatically, double-click the on the
desktop.
NOTE: Log on as an Administrator before
continuing.
2 Double-click the S S e e t t u u p p icon.
NOTE: When the Authenticate screen appears,
enter your administrator name and password.
If you do not know your administrator name or
password, click on the lower-left corner of
the screen, then follow the on-screen
instructions.
3 When the main menu appears, click Easy
Install and then Install, then follow the on-
screen instructions.
NOTE:
· Select Easy Install in order to install the
application software, on-screen manuals and
printer driver. Select Custom Install in order to
choose the options you would like to install.
· Adobe Photoshop CS, Adobe Photoshop CS2, or
Digital Photo Professional must be installed to use
Easy-PhotoPrint Pro.
4 Read the License Agreement and click Yes.
Follow the on-screen instructions to install the
software.
5 Follow the on-screen instructions to register
your product.
6 When the Print Head Alignment Recommended
screen appears, click Next.
7 When the Installation completed successfully
screen appears, click Restart.
The system is restarted automatically.
8
Start the print head alignment procedure.
a. After restarting the computer, select
Applications from the Go menu. Double-
click the Utilities folder, then the Printer
Setup Utility (Print Center when using Mac
OS X v.10.2.x) icon.
b. When the Printer List screen appears, select
Pro9000, then click Utility (Configure when
using Mac OS X v.10.2.x) icon.
If the printer is not displayed on the Printer
List, click Add to add the printer.
For details, follow the instructions in Mac
Help.
c. Select Pro9000 and click Maintenance.
d. Ensure that two sheets of letter size paper
are loaded in the Auto Sheet Feeder (top
paper feeder).
e. Click the down-arrow to select Test Print.
Click the Print Head Alignment icon and
follow the on-screen instructions.
NOTE:
· Print head alignment will take about five minutes
to complete. Do not start another operation here.
· Do not open the Top Cover while printing.
Print head alignment is automatically adjusted
9
by printing the patterns below.
NOTE: Some parts of the first pattern that is
printed will be faint.
10 Click Quit to exit the Canon IJ Printer Utility.
Introduction to the Front
Paper Feeding
You can load paper in both the Auto Sheet Feeder
and the Front Tray.
Loading paper in the Front Tray to print on large
size paper or to print on thick paper such as art
paper.
Front Tray
IMPORTANT:
· When loading paper in the Front Tray, the paper
sticks out from the back of the printer. Keep a
space of 40 cm / 15.7 inches for this purpose
behind the printer.
· There are wheels on the back corners of the
printer. Lift up the front of the printer to move it
back and forth.
40 cm / 15.7 inches
behind the Printer
NOTE: For details, refer to "Loading Paper in the
Front Tray" in "Loading Paper" in the Quick
Start Guide .