Preparing The Printer - Canon PIXMA iP6310D Series Quick Start Manual

Preparing the Printer

• For detailed information on the specialty media Canon provides for
Note
• Consult "Printing Media" in the User's Guide for detailed
1
Flatten the four corners of the paper before loading it.
When paper is curled, gently bend it in the opposite direction of the curl
Note
(without curling the reverse side) and then load the paper. How to flatten
paper curl, refer to "Paper is curled
2
Prepare to load paper.
Paper thickness
lever
• Place the printer on a flat surface.
Note
• Do not place any obstacles in front of the printer to keep this area
• Remove each sheet as soon as paper is ejected. If the paper output
• When performing duplex printing, pay great attention to the dust and
use with its various printers, see "Using Specialty Media
instructions on how to load specialty media into the printer.
Paper is curled" on page 24. Paper is curled Paper is curled
open for paper which is ejected.
slot is stacked with printed sheets it may interfere with the printer's
ejecting process.
stain on the area (desk, etc.) where the printed paper is ejected.
Printing with dust and stain remaining on this area can have a bad
effect on the printing result and printer.
Using Specialty Media" on page 9.
Using Specialty Media Using Specialty Media
(1) Open the paper support.
(2) Pull out the paper output tray.
(3) Move the paper thickness lever to the
correct position for the media in use.
Move the lever to its left position for
plain paper, and move it to the right
position for envelopes and T-Shirt
Transfers.
See "Canon genuine paper Canon genuine paper" on page
Canon genuine paper Canon genuine paper
10.
Basic Printing
5