Advertisement
8
F
10
D
E
G
Installation
Mounting column and fl oor plate
Use a soft underlay (fl eece from the packing material or a blan-
ket).
Place the fl oor plate on the underlay.
Stand the mounting column (fi g. 8, arrow D) on the fl oor plate
(fi g. 8, arrow F).
There is a recess in the fl oor plate (fi g. 8, arrow G) for the cables.
There is an opening for the cables in the mounting column (fi g.
8, arrow E).
Place the mounting column on the fl oor plate so that the holes
in the mounting column are in line with the threaded holes in
the fl oor plate (alignment).
The recess in the fl oor plate and the opening for the cables in
the mounting column must be positioned as shown in fi g. 8.
Turn in the four screws using the size 4 wrench. Tighten the
screws with a torque of 5 Nm (tighten well by hand).
Advertisement
