Advertisement
Problem (weighing unit)
Scale is not accurate.
Display will not turn on.
Parts support is available for these products. Please email sales@sealey.co.uk or telephone 01284 757500
BATTERY INFORMATION
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd would like to inform the user that this product contains
one or more batteries.
WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT REGULATIONS (WEEE)
When this product is no longer required, or has reached the end of it's useful life, please dispose of it in an environmentally friendly way,
in accordance with local waste regulations.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice. Please note that other versions of this product are available. If you require documentation for alternative versions, please email or call
our technical team on technical@sealey.co.uk or 01284 757505.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
Cause
The fork shoe is touching the bottom part of
the scale.
Cable in junction box is loose.
One of the load cells is broken.
Battery voltage is too low.
Battery life is complete.
01284 703534
sales@sealey.co.uk
Original Language Version
Solution
Remove anything that restricts movement of
the scale.
Check the connection in the junction box and
confirm it is secure.
Apply weight to all four corners of the scale
and the load cell with the different weight
should be replaced.
Replace batteries.
Replace batteries
www.sealey.co.uk
PT1150SC.V3
Issue 1 30/01/2020
Advertisement
