Canon imagePROGRAF iPF650 Install Manual page 10

If the printer is already connected to the network
• If the printer is already connected to
the network, confi rm the IP address
assigned to the printer. Ask your network
administrator for further information.
• If the printer is on, the Link indicator under
the LAN port lights.
MEMO
1000Base-T The LED on the bottom
connection lights green.
100Base-TX The LED on the top lights
connection orange.
10Base-T The LED on the top lights
connection green.
3
Confi rm that the required installation
items are selected in the Installation List
window, and then click Next.
• Point at a software title to view a summary
of the software.
MEMO
6
In the Printer Selection window, select
The printer is connected to computers
in a network and click Next.
• The IPv6 Devices tab is displayed in
Windows Vista and Windows Server 2008.
MEMO
• Printers already connected to the network
are labeled Available in IP Address
Status.
• If the printer you want to use is not
displayed in the list of printers, select
Specify the IP address of available
printers in the network and click Next.
The IP Address Specifi cation window
appears. Follow steps 8-11 on page 11-12
to fi nish installing the printer driver and the
User Manual.
1
Make sure the printer is on.
Turn the computer on and insert the
provided User Software CD-ROM for your
operating system in the CD-ROM drive.
4
In the Select Country or Region of Use
window, select the country or region of
use and click Next.
7
After reading the precautions in the
Getting Ready window, select Find
available printers in the network and
click Next.
9
After reviewing the installation results in
the Complete Installation window, click
Next.
10
2
In the Setup Menu window, click Install
Printer Driver.
To choose a different language, click
•
Language.
MEMO
5
After reading the license agreement, click
Yes.
8
Available printers are listed in the Search
Results window.
Select a printer from the list on either
their IPv4 Devices or IPv6 Devices tabs
and click Next.
The installation process begins.
10
In the Finish window, select Restart my
computer now and click Restart.