Remote Control Function; Cleaning And Maintenance - UFESA MF4090 Instruction Manual

EN
model. The related indicator light (2) will light on. You can now select other functions (speed, mode,
timer, mist).
To turn off the machine, press again the on/off button.

Remote Control Function

SPEED Button (B):
To start the fan at low speed, press On/Off button (A) once (when unit is off): the unit will operate at low
speed and the related indicator light(2) will be on.
Press speed button one time to select the medium speed: the related indicator light (2) will be on.
Press speed button another time to select the high speed: the related indicator light (2) will be on.
MODE Button (C):
When you press the On/Off button once, the fan will operate in Normal mode.
Press mode button one time to change to Natural mode: the unit simulates a natural breeze mode and
the related indicator light (3) will be on.
Press mode button another time to change to Sleeping mode: the unit simulates a soft breeze suitable
for night time use. The related indicator light (3) will be on.
Press again mode button to change to Normal mode.
TIMER Button (D):
When the unit is operating, you can set the timer to switch the fan off automatically after the set time.
Press the timer button repeatedly to select the desired time period in half hours increments: 30 min, 1h,
1h30 ....7h30.
The related indicator light (1) will illuminate on the control panel. When all the light (5) are off means that
time is not set and the unit will continuously work until you switch off manually the unit.
OSCILLATION Button (E):
Press the oscillation button to activate the automatic oscillation from right to left. The related indicator
light (4) will illuminate in the control panel.
Press again the oscillation button to deactivate the automatic oscillation; the indicator light (4) will off on
the control panel.
MIST Button (F):
Put some water into the water tank (15), and tighten up the lock nut. And put it back onto the fan.
When the mist function is selected the water indicator (17) light on in blue color.
If the water tank (15) is empty, the indicator light will be light on in red color.
Note: The mist function and speed function can be worked independent, or together.

CLEANING AND MAINTENANCE

Warning: before carrying out the normal cleaning operations, remove the plug from the mains socket.
To clean the appliance, use a soft, slightly damp cloth; do not use abrasive or corrosive products.
Do not immerse any part of the mist fan in water or any other liquid: if this happens, do not immerse your
hand in the liquid and, first of all, remove the plug from the mains socket. Carefully dry the device and
check that all the electrical parts are dry as well: if in doubt, contact a qualified technician.
Remove the water tank and clean it with lukewarm water; before replace the water tank in the unit make
sure it is completely dry.
It is essential to keep the ventilation holes of the motor free of dust and fluff.
In case of long periods of non-use store the mist fan, protecting it from dust and moisture; we
recommend using the original packaging.
If you decide to stop using the appliance, it is advisable to render it un- operational by cutting the power
cable (first ensuring that the plug has been disconnected from the mains socket) and making sure that
17