Advertisement
Adjustable head band
on/Mode Change/off
4. opeRatIon
4.1.
Remove USB cover to reveal USB charging point, where the provided USB charging cable can be inserted fig.1.
4.2.
Plug in the cable to an appropriate power source. Charging will take approximately 6hr.
4.3.
When charged remove USB cable and replace the USB cover.
4.4.
To switch on press on/mode change/off button (100%), press again to change mode (30%), press again to switch off.
4.5.
To activate by hand movement, hold down (approx 3 sec.) on/mode change/off button until button turns red. light can now be
operated by passing hand in front of sensor. Press button again to switch off.
5. MaIntenance
5.1.
Keep the torch clean by wiping with a damp cloth.
5.2.
Remove batteries if not being used for a long period of time.
5.3.
Store torch and batteries in a dry childproof area.
note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: no liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
envIRonMent pRotectIon
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Weee RegulatIons
dispose of this product at the end of its working life in compliance with the eU directive on Waste electrical and electronic equipment
(Weee). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
batteRy ReMoval
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme.
Jack Sealey ltd Batteries Producer Registration number (BPRn) is BPRn00705.
sealey group, Kempson Way, suffolk business park, bury st edmunds, suffolk. Ip32 7aR
01284 757500
© Jack Sealey limited
Button
USB Cover
01284 703534
Original Language Version
Sensor
sales@sealey.co.uk
Battery compartment
screw cap
fig.1
www.sealey.co.uk
HT108led Issue 2 (F) 11/02/19
Advertisement
