Download Print this page
Sealey CREE XPE MOTION SENSOR+ Quick Start Manual

Sealey CREE XPE MOTION SENSOR+ Quick Start Manual

Head torch 3w

Advertisement

Quick Links

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Instructions
1. SAFETY
1.1.
General
DO NOT shine directly into your, another person's or an animal's eyes.
8
DO NOT allow children to use the torch.
8
DO NOT use the torch if you suspect that the battery or the torch casing is damaged.
8
DO NOT leave batteries in a discharged state. Before storage remove batteries.
8
1.2.
Battery Safety
WARNING! To reduce the risk of burns or fire:
DO NOT attempt to open the batteries.
8
DO NOT crush, puncture, short contacts or dispose of in fire or water.
8
DO NOT expose to temperatures above 60°C (140°).
8
Replace only with the batteries designed for this product.
9
Recycle or dispose of used batteries as stipulated by local regulation.
9
If the electrolyte in the batteries gets on your skin, thoroughly wash with soap and water. If it gets in your eyes, rinse thoroughly with
9
cool water and seek immediate medical attention.
2. INTRODUCTION
Super bright twin pack includes a hands-free 3W CREE XPE LED head torch producing 180 lumens and a 3W CREE XPE LED hand held torch
producing 120 lumens. Head torch features three light settings (full light / half light / blink) and a motion sensor function allowing the user ease
switching on and off. Hand held torch features five light settings (full light / half light / low light / flash / SOS) plus the option to adjust the focus of
the light. Head torch powered by 3 x AAA, hand torch powered by 1 x AA (both supplied).
3. SPECIFICATION
Model No: ....................................................HT110(Head torch) ............................. HT110(Torch)
LED quantity: ................................................1 x 3W CREE XPE ........................1 x 3W CREE XPE
Lumen output: ..............................................180lm ................................................................120lm
Battery: .........................................................3 x AAA ............................................................ 1 x AA
4. OPERATION
© Jack Sealey Limited
HEAD TORCH 3W CREE XPE MOTION SENSOR +
HAND TORCH 3W CREE XPE
HT110
MODEL NO:
Original Language Version
HT110
Issue:1 - 17/07/18

Advertisement

loading

Summary of Contents for Sealey CREE XPE MOTION SENSOR+

  • Page 1 HT110 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
  • Page 2 BATTERY REMOVAL SEE 4.1.2./4.2.2. Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705.

This manual is also suitable for:

Cree xpeHt110