Automatic High Beams (Ahb) - Toyota RAV4 Hybrid 2020 Quick Reference Manual

TOYOTA SAFETY SENSE

Automatic High Beams (AHB)

(1)
AHB is a safety system designed to help drivers see more of what's ahead at
nighttime while reducing glare for oncoming drivers, AHB uses an in-vehicle
camera to help detect the headlights of oncoming vehicles and tail lights of
preceding vehicles, then automatically switches between high and low beams
as appropriate to provide the most light possible and enhance forward visibility.
By using high beams more frequently, the system may allow earlier detection of
pedestrians and obstacles.
Refer to the Toyota Owner's Manual for additional information on AHB operation,
settings adjustments, limitations, and precautions before attempting to use it.
ACTIVATING THE AHB SYSTEM
position.
The AHB indicator will come on when the headlights are turned on automatically
to indicate that the system is active.
Note: Pull the lever back toward you or press the AHB switch to turn the AHB
system off.
The AHB indicator will turn off. To turn switch to "
high beam indicator "
CONDITIONS WHERE AHB WILL TURN ON/OFF AUTOMATICALLY
When all of these conditions are met, high beams will be automatically turned on
• The area ahead of the vehicle is dark.
• There are no oncoming or preceding vehicles with headlights or tail lights
turned on.
• There are few streetlights on the road ahead.
If any of these conditions occur, high beams will be automatically turned off:
• The area ahead of the vehicle is not dark.
• Oncoming or preceding vehicles have headlights or tail lights turned on.
• There are many streetlights on the road ahead.
" switch.
" turns on.
™
(2)
" position and the manual
48
" or "AUTO"