Zanussi ZDSN653X2 User Manual page 10

Hide thumbs Also See for ZDSN653X2:
Table of Contents

Advertisement

Available languages

Available languages

level of the water softener to assure good washing
results.
Water hardness
German degrees
(°dH)
47 - 50
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
<4
1) Factory setting.
2) Do not use salt at this level.
Regardless of the type of detergent used, set
the proper water hardness level to keep the
salt refill indicator active.
Multi-tabs containing salt are not
effective enough to soften hard water.
How to set the water softener level
Make sure the appliance is in user mode.
1. Press
.
The indicator
The remaining indicators are off.
The display shows the current setting: e.g.
= level 5.
2. Press
repeatedly to change the setting.
3. Press the on/off button to confirm the setting.
10
French degrees
(°fH)
84 - 90
76 - 83
65 - 75
51 - 64
40 - 50
33 - 39
26 - 32
19 - 25
7 - 18
<7
still flashes.
Softening hard water increases the
consumption of water and energy as
well as the programme duration. The
higher the level of water softener, the
higher the consumption and the longer
the duration.
Clarke de-
mmol/l
grees
8.4 - 9.0
58 - 63
7.6 - 8.3
53 - 57
6.5 - 7.5
46 - 52
5.1 - 6.4
36 - 45
4.0 - 5.0
28 - 35
3.3 - 3.9
23 - 27
2.6 - 3.2
18 - 22
1.9 - 2.5
13 - 17
0.7 - 1.8
5 - 12
<0.7
THE RINSE AID EMPTY NOTIFICATION
The rinse aid helps to dry the dishes without
streaks and stains. It is automatically released
during the hot rinse phase.
When the rinse aid chamber is empty, the rinse aid
indicator is turned on notifying to refill rinse aid. If
the drying results are satisfactory while using multi-
tablets only, it is possible to deactivate the
notification for refilling rinse aid. However, for best
drying performance, always use rinse aid.
If standard detergent or multi-tablets without rinse
aid are used, activate the notification to keep the
rinse aid refill indicator active.
How to deactivate the rinse aid empty
notification
Make sure the appliance is in user mode.
1. Press
.
The indicator
The remaining indicators are off.
Water softener level
5
< 5
1
still flashes.
10
9
8
7
6
1)
4
3
2
2)

Advertisement

Table of Contents
loading

Table of Contents