HOSPECO SPHERGO POP TUCK n' GO Starter Kit User Manual

SPHERGO POP TUCK n' GO
®
Kit Contains:
Qty Item #
(1) 2505-SPH-MTG-EA
(1) 2505-SPH-TPS2-EA
(5/pk) N-SPH-DO664-S
HOW TO USE SPHERGO POP TUCK N' GO
®
1. Press triggers to open plates.
2. Place tool on top of cleaning cloth. Tuck ends between the plates.
3. Press down until you hear a "click." Start cleaning!
4. When cleaning is complete, do not touch the soiled cloth. To remove, hold over refuse
container. Press the triggers to reopen plates. Allow soiled cloth to slide off tool and into
garbage receptacle.
1 2
•
Do not bend wrist while
using the SPHERGO
POP TUCK n' GO
® ™
Surface Cleaning Tool.
SPH-MTG-KT
Starter Kit
™
Description
SPHERGO POP TUCK n' GO Tool
® ™
SPHERGO Telescoping Pole with Snap-In Socket
®
SPHERGO Pop Dry Cleaning Cloths
®
SURFACE CLEANING TOOL
™
3 4
 CORRECT  INCORRECT
HOW TO ATTACH THE SPHERGO
®
TELESCOPING POLE TO
SPHERGO POP TUCK N' GO
® ™
SURFACE CLEANING TOOL
•
When adjusting the length of the
telescopic handle, DO NOT torque/
fasten the handle too tightly –
damage to the handle might occur.
•
Place the SPHERGO POP ® TUCK N'
GO SURFACE CLEANING TOOL flat
™
on a stable surface or the ground;
push the telescoping aluminum
handle/socket straight down into the
ball handle.
HOW TO DETACH THE SPHERGO TELESCOPING POLE TO SPHERGO POP
®
TUCK N' GO SURFACE CLEANING TOOL
™
1. Place base flat on the ground.
2. Lightly step on both ends of base
3. Angle handle away from face.
4. Gently pull the telescopic handle upward.
SURFACE WIPER OPERATION
•
To avoid injury during vertical surface
cleaning, DO NOT raise arms above
shoulders.
•
DO NOT apply too much pressure on
the handle – damage to the handle
might occur.
®
KEEP ARMS
BELOW
SHOULDERS
SPH-MTG-KT-IS | DW 08.01.19