HOSPECO SPHERGO User Training Manual

SPHERGO
®
ATTACH SPHERGO
1
FLAT SURFACE CLEANING TOOL
• When adjusting the length of the telescopic handle,
DO NOT torque/fasten the handle too tightly –
damage to the handle might occur.
• Place the surface-cleaning base flat on a
stable surface or the ground; push the
telescoping aluminum handle/socket
straight down into the ball handle.
DETACH SPHERGO
2
SPHERGO FLAT SURFACE CLEANING TOOL
®
1. Place base flat on the ground.
2. Lightly step on both ends of base
3. Angle handle away from face.
4. Gently pull the telescopic handle upward.
 CORRECT
User Training Guide
HANDLE TO SPHERGO
®
HANDLE FROM
®
 INCORRECT
®
3

SURFACE WIPER OPERATION

• To avoid injury during vertical surface cleaning, DO NOT raise
arms above shoulders.
USING SPHERGO
4
TOOL WITHOUT HANDLE
• Do not bend wrist while using the SPHERGO
cleaning base with ball-handle.
5

LAUNDERING

• DO NOT use
fabric softener
KEEP ARMS BELOW SHOULDERS
• DO NOT apply too much pressure
on the handle – damage to the
handle might occur.
FLAT SURFACE CLEANING
®
surface
®
 CORRECT  INCORRECT
60 C
+