Connecting The Device; Protect The Device From Damage - Telestar DIRA S 32i CD Operating Instructions Manual

2. SAFETY INSTRUCTIONS
and that there are no naked flames (e.g. burning
candles) near the device or the power supply.
> The power adapter must never be touched or handled
with wet or damp hands.

2.4. Connecting the device

> Only connect the device to a properly installed, earthed
and electrically protected socket.
> Please ensure that the power source (socket)
is easily accessible.
> Do not kink or crush any cable connections.
> Before using the device, check whether the
voltage specification on the device corresponds to
local mains voltage. The information on the power
adapter must correspond to the local mains supply.
> Only connect the radio to a properly installed socket
with 220–240 V AC at 50–60 Hz.
> Place the radio on a firm, level surface.
> The device consumes power in standby mode.
To completely disconnect the device from the mains,
the power adapter must be unplugged from the socket.

2.5. Protect the device from damage

NOTE!
> Unfavourable environmental conditions such as
moisture, excessive heat or lack of ventilation can
damage the device.
> Only use the device in dry rooms.
103
DE