Shooting Time - Canon Powershot SX40 HS Getting Started

Shooting Movies
What if white and gray frames appear when shooting?
A white frame appears on the face that the camera detected as the main subject,
while gray frames appear on other detected faces. The frames will follow the
subjects within a certain range.
Zooming while shooting
Moving the zoom lever while shooting will zoom in on or out from the subject.
However, operation sounds will be recorded.
When the mode dial is set to A, the icon for the determined scene will
•
appear (see Camera User Guide). "When Moving" icons will not appear,
however. Under certain conditions, the icon that appears may not match
the actual scene.
• If you change the composition while shooting and the white balance is not
optimal, press the movie button to stop recording, then start recording
again (only when the image quality is set to
Guide)).
• Movies can be shot by pressing the movie button even when the mode
dial is in positions other than A (see Camera User Guide).
When the mode dial is set to E, you can adjust each setting for shooting
•
movies (see Camera User Guide).

Shooting Time

Memory Card
Shooting Time
• Shooting times are based on default settings.
• Maximum clip length is approx. 29 min. 59 sec.
• Recording may stop even if the maximum clip length has not been reached on some
memory cards. SD Speed Class 6 or higher memory cards are recommended.
26
Stop shooting.
Press the movie button again.
The camera will beep twice and stop
shooting the movie.
Shooting will automatically stop when the
memory card fills.
4 GB
Approx. 14 min. 34 sec.
(see Camera User
16 GB
Approx. 59 min. 40 sec.