Hamilton Beach 26047 Manual page 10

How to Use Waffle Plates
1
Plug cord into wall outlet. The red
Power ON light will glow.
TIP: A small amount of nonstick
cooking spray can be used on the
plates before preheating.
5
10
840237000 ENv02.indd 10
2
Choose desired waffle temperature
setting and preheat with cover
closed until the green READY
light comes on.
TIP: Waffle color and crispness
are determined by the
temperature of the plates. The
higher the temperature, the
browner and crisper the waffle.
Using an oven mitt, open cover. Remove waffle with plastic or
wooden utensil. Never use metal. This will damage the nonstick
coating of the appliance. Turn control to "MIN." Unplug unit when
through cooking. Let cool.
WARNING! Burn Hazard. Always use an oven mitt to protect hand
when opening a hot waffle maker. Escaping steam can burn.
BEFORE FIRST USE: Wash plates in dishwasher or in
hot, soapy water. Rinse and dry. Wipe or brush waffle
plates with vegetable oil. This is only recommended
before first use, but may be necessary afterwards.
3
Raise cover and pour 1/2 cup
(118 ml) of batter onto center
of bottom cooking plate. Lower
cover.
TIP: When adding nuts, fruits,
or chocolate chips to your waffle,
reduce the waffle batter by
2 Tablespoons (30 ml).
4
Waffles are done in about 6 to
8 minutes, depending on the
setting, recipe, when the green
READY light turns back on, or
when steaming begins to stop.
Do not preheat or operate unit
unless plates are in place.
12/20/13 2:55 PM