Indicator - Canon Powershot SD1400 IS DIGITAL ELPH User Manual

Screen Display in Dark Shooting Conditions
The display automatically brightens when shooting in dark conditions,
allowing you to check the composition (Night Display function). However, the
brightness of the image on the screen, and the brightness of the actual
image recorded may be different. Screen noise may appear and the
movement of the subject may appear somewhat jagged on the screen. This
has no effect on the recorded image.
Overexposure Warning during Playback
In "Detailed Information Display" (p. 44), overexposed areas of the image
flash on the screen.
Histogram during Playback
Dark
Bright

Indicator

The indicator on the back of the camera (p. 43) will light or blink depending
on the camera's status.
Colors Status
Lights
Green
Blinks
Lights
Orange
Blinks
When the indicator blinks green, data is being recorded to/read from the
memory card or various information is being transmitted. Do not turn off
the power, open the memory card slot/battery cover, shake or jolt the
camera. These actions may corrupt the image data or cause the camera
or memory card to malfunction.
●
The graph that appears in "Detailed
High
Information Display" (p. 44) is called the
histogram. The histogram shows the
distribution of brightness in an image
Low
horizontally, and the amount of brightness
vertically. When the graph approaches the
right side, the image is bright, but when it
approaches the left side, the image is
dark, and in this way you can judge the
exposure.
Shooting preparation complete/Display off (p. 146)
Recording/reading/transmitting image data
Shooting preparation complete (flash on)
Camera shake warning (p. 63)
Operation Status
Indicator
45