Connecting Bubble Jet Printer To The Camera; Power Outlet - Canon Powershot S45 User Manual

4
Press the printer's ON/OFF button to turn
on the power.
• When the printer is properly connected to the
camera, it powers up,
LCD monitor and the power/mode indicator is lit
in green.
• With the Card Photo Printer CP-10, the power
turns on when the power cord is connected to
the printer as shown in Step 2.

Connecting Bubble Jet Printer to the Camera

• Please read the user guide supplied with your BJ printer to see if it is compatible
with the direct print function, and for instructions on connection cables and
general operations.
1
Turn off the camera (p. 24).
2
Turn the BJ printer's power on after you
have connected the power cord to the
BJ printer and inserted the other end in
a power outlet.
3
Interface cable
DIGITAL
Terminal
appears on the camera
Connect the camera and printer using
the cable.
• When you insert the cable, make sure the
"Canon" logo on the cable faces the front of
To Bubble the camera (lens side).
Jet Printer
• appears on the camera LCD monitor and the
power/mode indicator is lit green when the
printer is properly connected to the camera.
127