Switching Between Focusing Modes - Canon Powershot SD1100 IS User Manual

Switching between Focusing Modes

The AF frame indicates the area of the composition on which the
camera focuses.
Face
Detect
(No frame) AiAF
Center
1
Select [AF Frame].
1. Press the
2. In the
button to select [AF Frame].
2
Accept the setting.
1. Use the
AF frame option.
2. Press the
• Refer to Changing the AF Frame
Size (p. 91).
The camera detects a face and sets the focus,
exposure* and white balance*
1
camera meters the subject so that the face is
correctly illuminated when the flash fires. If no face
is detected, the camera shoots using [AiAF].
*1 Only in Evaluative Metering mode (p. 98).
*2 Only in
The camera detects the subject and highlights the
AF frames, from 9 available points, that it will use
to determine the focus.
The AF frame will be fixed to center.
This is recommended when the target subject is at
the center of the composition. You can change the
size of the AF frame (p. 91).
button.
menu, use the
or button to select an
button.
Available Shooting Modes
(p. 100)
or
p. 222
. In addition, the
2
89