Canon Powershot S100 User Manual page 186

Changing Shooting Function Settings
• Gray items can also be set, however, they may not appear depending on
the Shooting mode.
• Grid lines will not be recorded on the image.
Changing the IS-Mode Settings
If camera shake is too strong, attach the camera to a tripod. You should
also set the IS Mode to [Off] when the camera is attached to a tripod.
Turning Off the Powered IS Function
Powered IS reduces subtle camera shake when shooting movies at max.
telephoto. However, when shooting while walking, or during long panning
shots, you should set Powered IS to [Off], as it may cause unexpected results
in these situations.
[Powered IS] settings will be disabled if [IS Mode] is set to [Off].
186
Choose [IS Settings], then press the m
button.
Press the op buttons or turn the 7 dial
to choose [IS Mode], then press the qr
buttons to choose an option.
Automatically sets the optimal
Continuous image stabilization for the scene
(Intelligent IS) (p. 207).
Image stabilization is only active
Shoot Only*
at the moment of shooting.
Off Turns off image stabilization.
* Setting changes to [Continuous] when shooting
movies.
Choose [IS Settings], then press the m
button.
Press the op buttons or turn the 7 dial
to choose [Powered IS], then press the qr
buttons to choose [Off].