Related Manuals for ADAMAS VFX-125-1
Summary of Contents for ADAMAS VFX-125-1
- Page 1 Manual VFX-125-1 VFX-125-3 VFX-125-3 VFX-125-1 READ THOROUGHLY BEFORE & SAVE FOR SUBSEQUENT USE 12-01-2011...
-
Page 2: Table Of Contents
Slot cutter VFX-125-1 (3) Contents ONTENTS INTRODUCTION ..........................2 ............................2 REFACE ..........................2 PPLICABILITY ..................... 2 TANDARDS AND DECLARATIONS GENERAL SAFETY .......................... 3 ..........................3 NTRODUCTION ..........................3 ASIC RULES ........................3 ERSONAL PROTECTION ............................ 3 QUIPMENT ..........................4 NVIRONMENT . -
Page 3: Introduction
This manual was created by the users of the ADAMAS slot cutting machine VFX-125-1 (3). The manual contains information on the setting up, operation and maintenance of the VFX-125-1(3). -
Page 4: General Safety
2.2 Basic rules Prevent electrocution All slot cutters are fitted with a plug socket. For the VFX-125-1 (version 2.2KW 230V) the power cable must consist of a minimum of: 2+1 core 2.5qmm. • For the VFX-125-3 (version 3.5KW 400V) the power cable must consist of a minimum of: 3+1 core 1.5qmm. -
Page 5: Environment
Slot cutter VFX-125-1 (3) General safety Maintain the tool with care Keep the tool sharp and clean in order to work better and more safely. Follow the safety regulations. Keep the handles dry and free of oil and grease. Check the equipment for damage Check that moving parts function correctly: that they do not jam / that no parts are broken / that all parts are fitted correctly / that all other conditions that could affect the operation of the device are correct. -
Page 6: Description Of The Equipment
3. D ESCRIPTION OF THE EQUIPMENT The ADAMAS VFX-125-1(3) is a slot cutting machine intended for cutting with a diamond milling cutter with a maximum diameter of 125 mm. The standard machines have a 2.2 kW/230 V 1-phase electric motor (VFX-125-1) or a 3.5 kW/400 V 3-phase electric motor (VFX-125-3). Progress takes place by pushing the machine forward with the steering arm. -
Page 7: Using The Equipment
Slot cutter VFX-125-1 (3) 4. U SING THE EQUIPMENT This chapter provides a step-by-step description of how the equipment must be set up. ULL THE PLUG OUT OF THE SOCKET BEFORE EXECUTING MAINTENANCE OR CHECKS 4.1.1 Disassembling the cutter Disassemble the extraction fan (star button 2x). The cutter shaft must be in the lowest position •... -
Page 8: Starting The Slot Cutting Machine
Slot cutter VFX-125-1 (3) Maintenance 4.2 Starting the slot cutting machine When the machine has been set up, the following actions must be taken when you wish to start the machine. Secure the workplace • Check for hazards! • Electric motor Connect the motor to the mains Voltage (with correctly functioning earth leakage switch). -
Page 9: Maintenance
Slot cutter VFX-125-1 (3) Maintenance 5. M AINTENANCE In general, it can be stated that regular maintenance (inspection/cleaning/lubrication) has a positive effect on the safety and life span of the equipment. The various points of maintenance and inspection are shown in Table 5-1. It is also indicated how frequently this must take place, assuming operation under normal conditions. -
Page 10: Guarantee
6. G UARANTEE 6.1 Period A guarantee period of 12 months commencing at the time of delivery applies for the VFX-125-1 and VFX-125-3. Guarantee claims must be indicated by submitting the purchase invoice. 6.2 Contents The guarantee covers the repair of any faults that can be traced to material or manufacturing errors. -
Page 11: Technical Specifications
Slot cutter VFX-125-1 (3) Supplier’s declaration 8. T ECHNICAL SPECIFICATIONS Slot cutting machine type: VFX-125-1 VFX-125-3 Cutter diameter diameter depth (maximum) Bore diameter 9040 rev/min Electrical motor power mains Voltage max. amperage standard RPM 2850 2850 rev/min protection level IP55... - Page 12 Slot cutter VFX-125-1 (3) Supplier’s declaration Adamas Aartsdijkweg 19 2676 LE Maasdijk Type: VFX-125-1 & 3 Tel.: +31 174 511333 September 2017 Fax: +31 174 511368 ‡…Žƒ”ƒ–‹‘ ‘ˆ …‘ˆ‘”‹–› ADAMAS BV Page: 11...