Using the Viewfinder
The viewfinder (Basic Guide p. 2) can be used to conserve power
by turning the LCD monitor off (p. 12) while shooting.
Power Saving Function
This camera is equipped with a power saving function. The power
will shut off in the following circumstances. Press the power button
again to restore power.
Shooting Mode
Playback Mode
Connected to a Printer
* This time can be changed.
The power saving function will not activate during a slide
show or while the camera is connected to a computer.
The power saving function settings can be changed (p. 22).
Powers down approximately 3 minutes after
the last control is accessed on the camera.
The LCD monitor automatically turns off 1
minute* after the last control is accessed
even if [Auto Power Down] is set to [Off].
Press any button other than the power button
to turn the LCD monitor back on.
Powers down approximately 5 minutes after
the last control is accessed on the camera.
17