Table of Contents
Advertisement
Quick Links
IR Reflective Sensor 10cm
Product Features
•
Can detect the presence of a highly reflective object at 10cm, for less reflective objects (like
hands) the distance is about 5cm.
•
The sensor is Ratiometric
Designed to be used with:
•
1018 - PhidgetInterfaceKit 8/8/8
•
1019 - PhidgetInterfaceKit 8/8/8 w/ 6 Port Hub
•
1070 - PhidgetSBC
•
1202/1203 PhidgetTextLCD with InterfaceKit 8/8/8
1103_0_Product_Manual created: 08/14/09
1103
Page 1
Advertisement
Table of Contents
Related Manuals for Phidgets 1103
Summary of Contents for Phidgets 1103
- Page 1 1103 IR Reflective Sensor 10cm Product Features • Can detect the presence of a highly reflective object at 10cm, for less reflective objects (like hands) the distance is about 5cm. • The sensor is Ratiometric Designed to be used with: •...
- Page 2 Getting Started Installing the Hardware The Kit contains: You will also need: • A IR Reflective Sensor 10cm • A PhidgetInterfaceKit 8/8/8 or a PhidgetTextLCD • A Sensor Cable • A USB Cable Connecting all the pieces Connect the IR Reflective Sensor 10cm to an Analog Input on the PhidgetInterfaceKit 8/8/8 board using the sensor cable.
- Page 3 Testing the IR Reflective Sensor 10cm connected to an InterfaceKit 8/8/8 Using Windows 2000/XP/Vista Double Click on the icon to activate the Phidget Control Panel and make sure that the Phidget InterfaceKit 8/8/8 is properly attached to your PC. Double Click on Phidget InterfaceKit 8/8/8 in the Phidget Control Panel to bring up InterfaceKit-full and check that the box labelled Attached contains the word True.
- Page 4 In the Advanced Sensor Form, select the 1103 - IR Reflective Sensor 10cm from the drop down menu to get a display for your sensor. The sensor’s detection state for an object is shown here. Formula used to convert the analog input SensorValue into a detection state.
- Page 5 Technical Information This sensor can detect the presence of a highly reflective object at 10cm, for less reflective objects (like hands) the distance is about 5cm. The sensor will not detect objects that are more than 5 to 10cm away depending on the type of objects, but will detect objects that are closer than 5 to 10cm.
- Page 6 Analog Input Cable Connectors Each Analog Input uses a 3-pin, 0.100 inch pitch locking connector. Pictured here is a plug with the connections labeled. The connectors are commonly available - refer to the Table below for manufacturer part numbers. Cable Connectors Manufacturer Part Number Description...
- Page 7 Device Specifications Current Consumption 13mA Output Impedance 1K ohms Supply Voltage 4.75VDC to 5.25VDC Product History Date Product Revision Comment March 2006 Product Release Page 7 1103_0_Product_Manual created: 08/14/09...
Need help?
Do you have a question about the 1103 and is the answer not in the manual?
Questions and answers