Subscribe to Our Youtube Channel
Related Manuals for InCarTec 27-572
Summary of Contents for InCarTec 27-572
- Page 1 27-572 - CAMERA INPUT INTERFACE FOR BMW WITH EVO (ID5/ID6) IDRIVE SYSTEMS CONNECTION DIAGRAM...
- Page 2 27-572 - CAMERA INPUT INTERFACE FOR BMW WITH EVO (ID5/ID6) IDRIVE SYSTEMS DIP SWITCH SETTINGS Please disconnect & reconnect interface power after changing any DIP setting *Quick Dip Switch Settings *Please note that DIP Switch 5 and DIP Switch 8 put ON (▼) with OEM rear camera...
- Page 3 27-572 - CAMERA INPUT INTERFACE FOR BMW WITH EVO (ID5/ID6) IDRIVE SYSTEMS INSTALLATION GUIDE Please ensure the car is switched off to avoid damaging the interface/ vehicle STEP ONE Using a panel tool or similar, carefully prize up the air conditioning panel in the highlighted positions.
- Page 4 27-572 - CAMERA INPUT INTERFACE FOR BMW WITH EVO (ID5/ID6) IDRIVE SYSTEMS STEP THREE Remove the screws in the highlighted positions and pull out the head unit Please note: If the original quadlock has fibre optic cables, you will need to move these to the new quadlock connector.
- Page 5 27-572 - CAMERA INPUT INTERFACE FOR BMW WITH EVO (ID5/ID6) IDRIVE SYSTEMS DVR SWITCHING ADJUST COLOUR/ CONTRAST SETTINGS Hold the MENU button on iDrive controller for Hold down the centre controller for 4 seconds to enter iDrive menu and adjust colour/ contrast settings...
Need help?
Do you have a question about the 27-572 and is the answer not in the manual?
Questions and answers