△ Warning: In order to protect the driving safety and avoid break the traffic law; please DO NOT operate the interface while driving. The reversing surveillance function just is used in reversing assistance. Please check the entire surroundings while reversing.
Page 4
Kindly check all components are in the box when receiving the product. If anything missing, inform to the supplier/manufacturer. Start the engine before loading, check the interface whether have function displayed, key control whether correct, the vehicle interface whether having a scratch. Please give the feedback to the supplier/manufacturer if there have any questions.
3.Features: A. Support Intelligent Parking Assist System including PDC (Parking Distance Control) and FPG (Flexible Parking Guidelines) B. Support further software update by TF Card C. Support power supply for rear view camera D. Support automatically switched to front view camera, auto trigger after R to D gear...
Page 10
Chart A Reverse detect (Connect to 360 reverse detect 360 Reverse DET when install 360, otherwise don’t have to ) VCC 12V Supply 12V power for backup camera ACC_OUT Supply power for DVR or other video devices. Just connect the ACC_OUT (RED) when use aftermarket front view camera...
8. Operation Instruction Note: Please use the protective measures, avoid damaging the original car accessories 1. Remove the screws, open the glove box and remove the six screws 2. Remove the two screws below glove box and take out the head unit.
9. DVR Switching Please put on (▼) the dip switch No.6, turn on the DVR, then long press 3 seconds to enter DVR by press hang on/up button on steering wheel.