Turning off the AF-Assist Beam
When the camera has focusing difficulties while you press the shutter button
halfway, the AF-assist Beam will automatically light to assist focusing. You
can turn off this function.
Displaying the Overlay
You can display grid lines for vertical and horizontal guidance, or 3:2 guide
to confirm the printable area for L size or postcard size prints.
•
In
,
•
Grid lines will not be recorded on the image.
•
The gray areas on the top and bottom of the screen will not be printed;
however, the entire image displayed will be recorded.
●
Select [AF-assist Beam], then press the qr
buttons to select [Off].
●
Select [Disp. Overlay], then press the qr
buttons to select a setting.
●
[Grid Lines]: A grid overlays the display.
[3:2 Guide]: The areas outside the 3:2 range
are grayed out.
These areas will not print when printing on
paper of 3:2 aspect ratio.
and
modes, you cannot set [3:2 Guide] and [Both].
Changing Shooting Functions
123