Changing Functions
The functions listed in the 3 tab are useful functions that you can set for normal
usage. You can set them in the Shooting or Playback mode, by pressing the ·
button.
Turning Off the Start-up Image
You can turn off the start-up image that displays when you turn on the
camera.
Changing the Display Brightness
You can adjust the brightness while checking the brightness of an image.
Turning off the Power Saving Function
You can set the power saving function (p. 42) to [Off]. However, setting to
[On] is recommended to save battery power.
118
Select [Start-up Image], then press the qr
●
buttons to select [Off].
●
Select [LCD Brightness], then press the qr
buttons to adjust the brightness.
●
Choose [Power Saving], then press the
button.
●
Press the op buttons to select [Auto Power
Down], then use the qr buttons to select [Off].
●
If you set [Auto Power Down] to [Off], be
careful not to forget to turn off the camera after
use.
m