Advertisement
Connecting the Matrix Video Extender Box
Setting Up Your Wall Using One Extender Box
2
If you have not already done so, it is recommended that you label all of your
cables before running them. Use the dispenser of cable labels you received
with your Matrix Video Wall.
1
Plug one end of the DC wall power adapter into the AC outlet. Plug the
other end into the 12W DC power connector on the OUTPUT side of the
extender box. If there is power coming into the extender box, the POWER
LED on the INPUT side should be green.
2
Plug one end of the male to male IR cable into the IR connector of the
master (A) Quad controller module. Plug the other end into the IR Out
connector on the INPUT side of the extender box.
Advertisement
