Printing With Card Photo Printer; Connecting Card Photo Printer Cp-10 - Canon Digital IXUS 300 User Manual

Printing with Card Photo Printer CP-10
The optional Card Photo Printer CP-10 can be used to print images
directly and effortlessly from the camera. It can also print images
marked with DPOF print settings.

Connecting Card Photo Printer CP-10

Connect the printer to the camera using Direct Interface Cable DIF-
100, which is supplied with the printer.
• You are recommended to use a household power source (AC
adapter sold separately) to power the camera when connecting
it to a printer. When using a battery, ensure that it is fully
charged. Monitor the battery charge closely when printing.
To an Electrical
Outlet
Direct Interface
Cable DIF-100
mark appears on the
connector.
• Please refer to the Card Photo Printer CP-10 manual for
instructions on feeding paper or installing the ink cassette.
• The lens retracts right away if the mode dial is turned from a
, ,
is connected.
• Plug the power cord into the printer
and then into an electrical outlet.
• Connect the direct interface cable to
the printer.
• Open the terminal cover on the
camera and attach the direct
interface cable to the Digital terminal.
• Position the cable's connector so the
• When detaching the cable, from the
camera's Digital Terminal, always
grip the sides of the cable's plug.
• After the printer is connected, turn
the camera power on and turn the
mode dial to the
or mode to the
mark faces the camera's rear panel.
position when the printer
position.
65