Advertisement
The digital display:
①shows the actual temperature of the tip.
②shows the setting temperature. Short press the "UP"/"DOWN" button to adjust the
temperature by ±1℃. Long-press the button to adjust it quickly.
③Press the ℃/℉ button to change the temperature unit between ℃ and ℉.
④When the actual temperature of the tip is lower than the setting, "HEAT ON" will display.
⑤When the difference is more than ±10℃ between the actual and setting temperatures,
"WAIT" will display. Wait until it has disappeared.
⑥When "ERROR" displays, there may be some problem with the system. Or the soldering
iron/desoldering gun is not correctly connected.
4. Safety Instruction
The manufacturer assumes no liability for uses other than those described in the operating
instructions or for unauthorized alterations.
The operating instructions and cautions should be read carefully and kept in an easily
visible location in the vicinity of the control system. Non-observance of the cautions will
result in accidents, injury or risks to health.
5. Please note it has no sleep function.
6. Caution
6.1 The power cord only can be inserted in approved power sockets or adapters.
6.2 High Temperature
The temperature of the soldering tip or the nozzle will reach as high as around 480℃（896℉)
when the power switch is on. Since mishandling may lead to burn and fire, be sure to comply
with the following precautions:
Do not touch metallic parts near the soldering tip/ nozzle.
Do not use this system near the flammable items.
Advise other people in the work area that the unit can reach a very high temperature and
should be considered potentially dangerous.
Turn off the power switch while taking breaks and when finishing using.
Page 3 of 4
Advertisement
