Download Print this page

Doss ZD917 Manual

2 in 1 soldering and desoldering station; smd repairing system

Download this manual

Page 1 of 4

DOSS 2 in 1 Soldering and Desoldering Station

SMD Repairing System

Model: ZD917

This SMD repairing system consists of the following parts:

1x ZD917 main unit;

1x ZD415 soldering iron with N4-1 tip;

1x soldering iron stand;

1x ZD552 desoldering gun;

1x Tip N5-1 Ø1.0mm; 1x Tip N5-3 Ø1.3mm; 1x Filter 5519 Ø20.8mm;

3x Filter 5518 Ø16.8mm;

3x Soldering Iron Clearer Pin Ø0.7/0.9/1.2 mm

Ratings: AC220-240V; 50Hz, Class I; 160W

1. Description

This soldering and desoldering station is a high-performance and multi-functional station that

is developed for electronic product research, production and rework. This tool is used in the

Page 1 Page 1 of 4 DOSS 2 in 1 Soldering and Desoldering Station SMD Repairing System Model: ZD917 This SMD repairing system consists of the following parts: 1x ZD917 main unit; 1x ZD415 soldering iron with N4-1 tip; 1x soldering iron stand;...
Page 2 Page 2 of 4 fields of electronic research, teaching and production, especially in the repairing and reworking on the electronic appliances and communication equipments. 2. Controlling Unit The soldering iron and the desoldering gun are controlled automatically by two micro-processors. The digital controlled electronics, high-quality sensor and heat exchange system guarantee precise temperature control of the soldering tip.
Page 3 Page 3 of 4 The digital display: ①shows the actual temperature of the tip. ②shows the setting temperature. Short press the “UP”/“DOWN” button to adjust the temperature by ±1℃. Long-press the button to adjust it quickly. ③Press the ℃/℉ button to change the temperature unit between ℃ and ℉. ④When the actual temperature of the tip is lower than the setting, "HEAT ON"...
Page 4 Do not use the soldering tool in a moist or wet environment. The soldering iron and the hot air gun should be placed on the holder after finished using. 6.7 Observe the valid safety regulations at your work place. Note: This instruction is also available to download from the distributor’s website: www.doss.com.au.