Kohler Aegis ELH775 Service Manual page 12

Specifi cations
TORQUE SEQUENCES
(Refer to Torque Specifi cations for torque values).
Water Pump Fasteners
TORQUE SPECIFICATIONS
Intake Manifold
Intake Manifold Fastener (torque in 2 increments)
(torque sequence on page 11)
Thermostat Housing Mounting Fastener
Air Cleaner Adapter Mounting Fastener
Fuel Injector Bracket Fastener
Closure Plate
Closure Plate Fastener (torque sequence on page 11)
Connecting Rod
Cap Fastener (torque in increments)
Crankcase
Breather Cover Fastener (torque sequence on page
10)
Breather Reed Retainer Fastener
Oil Sentry
™
Oil Drain Plug
Cylinder Head
Cylinder Head Fastener (torque in 2 increments)
(torque sequence on page 11)
Rocker Pivot Fastener
Electric Starter
Starter Mounting Screw
Starter Solenoid Positive (+) Brush Lead Retaining Nut
Values are in Metric units. Values in parentheses are English equivalents.
3
Lubricate threads with engine oil prior to assembly.
6
12
3,6
KohlerEngines.com
ELH775
3
5
1
6
4
ELH775
fi rst to 7.4 N·m (66 in. lb.)
fi nally to 9.9 N·m (88 in. lb.)
6.2-7.3 N·m (55-65 in. lb.)
7.3 N·m (65 in. lb.)
4.0 N·m (35 in. lb.)
24.4 N·m (216 in. lb.)
13.6 N·m (120 in. lb.)
10.7 N·m (95 in. lb.) into new hole
7.3 N·m (65 in. lb.) into used hole
4.0 N·m (35 in. lb.)
4.5 N·m (40 in. lb.)
13.6 N·m (10 ft. lb.)
fi rst to 16.9 N·m (150 in. lb.)
fi nally to 33.9 N·m (300 in. lb.)
11.3 N·m (100 in. lb.)
15.3 N·m (135 in. lb.)
8.0-11.0 N·m (71-97 in. lb.)
2
66 690 14 Rev. A