Setting The Display Overlay - Canon Powershot TX1 User Manual

The interval between shots lengthens when the built-in
memory of the camera fills.
If the flash is used, the interval between shots lengthens
because the flash must charge.
When set to
set to [Off] (p. 46).

Setting the Display Overlay

Shooting Mode
You can check a composition's horizontal and vertical alignment as
well as a 3:2 aspect ratio print range on the LCD monitor by using a
shooting guide while shooting.
Displays grid lines dividing the monitor into 9 areas,
Grid Lines allowing you to check the subject's horizontal and vertical
alignment.
You can check what can be printed in a composition using
a 3:2 aspect ratio*. The portion that will not print displays
3:2 Guide
in gray.
* Images are recorded at the same aspect ratio of 4:3 as shown in
the normal viewing mode.
You can display both the grid lines and 3:2 guide at the
Both
same time.
1
(Rec.) Menu
[Grid Lines]/[3:2 Guide]/[Both].
See Menus and Settings (p. 22).
* Default setting.
The grid lines and 3:2 guide do not appear on recorded
images.
When shooting a movie, only [Grid Lines] can be used.
, images will be shot with Face Detect AF
[Disp. Overlay] [Off]*/
37