Advertisement
Quick Links
READ AND SAVE THESE INSTRUCTIONS
Disconnect from power supply before performing maintenance procedures
such as cabinet cleaning, changing filters or servicing of electric motor or
other electric components.
To reduce the risk of fire or electric shock, do not use this fan with any solid-
state speed control device.
For general ventilating use only. Do not use to exhaust hazardous or
explosive materials or vapors.
Use only a 15-Amp Fuse.
Do not operate without having all filters in place.
Do not operate any fan with a damaged cord or plug. Discard fan or return to
an authorized service facility for examination and/or repair.
Do not run cord under carpeting. Do not cover cord with throw rugs, runners
or similar coverings. Arrange cord away from traffic area and where it will not
be tripped over.
GS3-200 Series
Air Filtration System
Operations Manual
WARNING:
WARNING:
WARNING:
WARNING:
CAUTION:
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Fumex GS3-200 Series
Summary of Contents for Fumex GS3-200 Series
- Page 1 GS3-200 Series Air Filtration System Operations Manual READ AND SAVE THESE INSTRUCTIONS WARNING: Disconnect from power supply before performing maintenance procedures such as cabinet cleaning, changing filters or servicing of electric motor or other electric components. WARNING: To reduce the risk of fire or electric shock, do not use this fan with any solid- state speed control device.
-
Page 2: Getting Started
Install the air inlet flange (labeled) to the air inlet port located at the back bottom of the GS3-200 cabinet. Secure the port with the screws provided. Attach the hose to the inlet. Connect the hose to a Fumex suction hood or place as close as possible to the pollution source. - Page 3 VOC occurs the “GAS” warning light will illuminate. GENERAL FILTER CARE Fumex GS3-200 air purifiers feature a multi-stage filtration system designed to remove a wide range of pollutants from the process plume in an extremely efficient, and cost-effective manner. Once the warning lights illuminate, filters should be checked and clogged filters replaced.
-
Page 4: General Maintenance
– some completely harmless regardless of concentration. To ensure employee safety the type and concentration of pollutants must be determined. Please contact Fumex Engineering for filter selection assistance. These filters utilize a blended activated carbon and activated alumina impregnated with KMnO4 filter to capture and treat gases/odors. - Page 5 Fumex reserves the right to discontinue any item and to make changes in the specifications, terms and conditions or prices at any time without prior notice. Information furnished in the specifications is believed to be accurate and reliable at time of printing, however Fumex accepts no responsibility for product use, or the effect of future design or specification changes.
- Page 6 7. Now that the physical switch is activated and the unit is in the “Soft On” state, the software will need to be reprogramed via a flash drive with a configuration file and the USB port on the control board. (Contact Fumex to acquire the correct configuration file for your unit).
- Page 7 7. Now that the physical switch is activated and the unit is in the “Soft On” state, the software will need to be reprogramed via a flash drive with a configuration file and the USB port on the control board. (Contact Fumex to acquire the correct configuration file for your unit).
- Page 8 DRAWINGS AND FIGURES Figure 1...
- Page 9 DRAWINGS AND FIGURES RELAY ACTIVATION SWITCH Figure 2 Figure 3...
Need help?
Do you have a question about the GS3-200 Series and is the answer not in the manual?
Questions and answers