CyberData 011100 Installation Quick Reference

Moving the Clock Connector Cover Plate
Connecting Power (optional power injector)
To Network
Ethernet
Optional power injector
(CyberData # 010867A)
Device
Connecting Power (PoE)
To PoE Network
© 2010, CyberData Corporation, ALL RIGHTS RESERVED
1. Unscrew and remove the two attachment
cover screws.
Cover plate
2. Rotate the clock connector cover plate 180
degrees as shown in the picture on the left.
3. Screw and tighten the cover screws to
secure the cover plate in place.
Contacting CyberData
Corporate Headquarters
CyberData Corporation
2555 Garden Road
Monterey, CA 93940, USA
Phone: 831-373-2601
Fax: 831-373-4193
www.CyberData.net
Sales: (831) 373-2601 ext. 334
Support: 831-373-2601 ext. 333
Email: support@CyberData.net
RMA Dept: (831) 373-2601 ext. 136
Email: RMA@CyberData.net
Warranty information available at:
http://www.CyberData.net/index.html
930349B
Wall Mount Adapter Parts
(1) Wall Mount Adapter
Install Jumper JP1 Prior to Installing the Clock Kit
Make sure that jumper JP1 is installed prior to installing the Clock Kit (see the picture on the right). Installing JP1 powers
the Real Time Clock from the battery. If you do not install JP1, the clock will lose it's time when the power is disconnected.
Jumper Functions:
Jumper
JP1
JP2
JP3
JP4
JP5
Quick Reference Quick Reference
Installation Quick Reference
Clock Kit Wall Mount Adapter for
Indoor Paging Speakers
011100*, RAL 9002, Gray White, Standard
011101, RAL 9003, Signal White, Optional
*Replaces the 011023 number.
The Clock Kit Wall Mount Adapter enables the CyberData V2 VoIP Ceiling Speaker to be
upgraded to a highly visible public address device with a time display.
The large display characters are easily read and adjust for ambient light conditions. Time sync
is performed by NTP and a built-in real -time clock.
Power is supplied by the CyberData V2 Speaker from a single PoE connection.
The documentation for this product is released in an English language version only. You can
download PDF copies of CyberData product documentation at:
http://www.cyberdata.net/products/voip/digitalanalog/clockkit/docs.html
(1) Template for Wall Mount
(1) Drywall Mounting Kit
Adapter and Screw Holes*
(4) Plastic Ribbed Anchors
(4) #6 Sheet Metal Screws
Function
Battery - Connect
Manufacturing - Open
Manufacturing - Open
Manufacturing - Open
Manufacturing - Open
930349B
*Note: the ceiling speaker
wall-mounted adapter screws
will be included in the ceiling
speaker kit.
JP1
© 2010, CyberData Corporation, ALL RIGHTS RESERVED