Canon MV5iMC Instruction Manual page 98

Dubbing
E
Do not connect/disconnect any cables to/from the camcorder when dubbing
audio or preparing to dub audio.
1. Locate the point where you want to start audio dubbing, then
press the PAUSE button.
• You can use the playback buttons on the body of the camcorder or the
special playback functions on the wireless controller in the same way as
in playback mode.
• The camcorder becomes set to playback pause mode.
2. Press the AUDIO DUB. button.
• AUDIO DUB. and
3. Press the PAUSE button.
• Audio dubbing starts.
• Direct your voice into the microphone.
•
4. When you get to the point where you want to stop dubbing,
press the STOP button.
• Audio dubbing stops and AUDIO DUB. disappears from the display.
• The camcorder returns to stop mode.
• You can also set the zero set memory (
stop audio dubbing, then every time you return to that position, audio
dubbing will stop.
• If instead of pressing STOP you press PAUSE, the camcorder will
return to the playback pause mode.
98
appear on the display.
changes to .
ZERO SET
SEARCH
MEMORY SELECT
AUDIO
REW PLAY
DUB.
AV
– / STOP
INSERT
PAUSE SLOW
REMOTE SET
84) at the place you want to
FF
+ /
× 2