Canon MV5iMC Instruction Manual page 102

5. Press the AUDIO DUB. button.
E
• AUDIO DUB. and
6. Press the PAUSE button (and start play on the other audio
device if AUDIO IN).
• Audio dubbing starts.
• Direct your voice into the microphone.
•
7. When you get to the point where you want to stop dubbing,
press the STOP button (and then stop play on the other audio
device if AUDIO IN).
• Audio dubbing stops and AUDIO DUB. disappears from the display.
• The camcorder returns to stop mode.
• You can also set zero set memory (
audio dubbing, then every time you return to that position, audio
dubbing will stop.
• If instead of pressing STOP you press PAUSE, the camcorder will
return to the playback pause mode.
Notes:
• You cannot use the DV terminal while adding sound.
• You might want to adjust the audio mix (
with added sound.
• There may be a loss of sound quality if you add sound to a tape recorded
on a camcorder other than the MV5i/MV5i MC.
• After adding sound 3 or more times to the same place on a tape, there may
be some loss in sound quality.
102
appear on the display.
changes to .
84) at the place you want to stop
103) when playing back a tape