Canon MV530 Instruction Manual page 115

G
Erasing still images
Erase images singly or all at once.
• You cannot erase protected images. Cancel image protection first in order to
erase an image.
• Erase images with caution. Once an image has been erased, it cannot be restored.
There are 3 ways to erase a single image.
To erase images one at a time
➡ CARD PHOTO REVIEW menu (
1.
+
CARD CAMERA
➡ File Operation menu
2. +
PLAY
CARD
(VCR)
To erase images one at a time or erase all images on the memory card at once
➡ Card Operations submenu
3. +
PLAY
CARD
(VCR)
: When playing back an image in CARD PLAY (VCR) mode
SINGLE
: When displaying an index screen in CARD PLAY (VCR) mode
INDEX
CARD PHOTO REVIEW
+
CARD CAMERA
1. During/after recoding a still image, press the CARD – button to
open the CARD PHOTO REVIEW menu.
• If you press the button after recording a still image, the last image recorded
appears in the display.
• If you press the button while recording a still image, the menu appears
immediately.
• PROTECT
• If you select |RETURN, the still image disappears.
To protect an image
2. Select PROTECT
• The protect mark appears on the image.
• Now you are unable to erase this image.
• Press the selector dial again to cancel it.
• If you select |RETURN, the still image disappears.
To erase an image
2. Select IMAGE ERASE and press the selector dial in.
• ERASE THIS IMAGE? NO YES appears in the display.
3. Select YES and press the selector dial in.
• The image is erased.
, IMAGE ERASE settings appear.
and press the selector dial in.
115)
( 116)
SINGLE
( 120)
SINGLE
E
115