Panasonic TH-43JX600Z Operating Instructions Manual page 5

Anti-falling accessories
Attaching the pedestal
1
Assemble the pedestal
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking the
TV.
1
Lay the TV on a foam mat or thick soft cloth on a
table.
2
Remove the assembly screws
Inserting remote's batteries
Note the correct
polarity (+ or -)
Wall mounting the TV (optional)
Bracket x 2
Please contact your local Panasonic dealer to purchase the
Rope x 2
recommended wall-hanging bracket.
Rear of the TV
■
Model
43-inch
50-inch
55-inch
65-inch
75-inch
■
Model
43-inch
50-inch
55-inch
65-inch
75-inch
from the TV.
Warning
● When optional accessories such as wall brackets etc.
are used, always read and follow the manufacturer
installation and usage instructions.
● Do not mount the unit directly below ceiling lights
push down
the cover (such as spotlights or halogen lights) which typically
give off high heat. Doing so may warp or damage
plastic cabinet parts.
● When installing wall brackets you must ensure the
wall bracket is not electrically grounded to metal wall
studs. Always ensure that there are no electrical
cables, pipes etc. in the wall before you begin the
wall bracket installation.
● To prevent fall and injury, remove the TV from its
fixed wall position when it is no longer in use.
a
b
Screw for fixing the TV onto the
wall-hanging bracket(not supplied)
Holes for wall-hanging bracket installation
a
300 mm
300 mm
300 mm
400 mm
400 mm
Depth of screw
Type
Minimum Maximum
M6 12 mm
M6 12 mm
M6 12 mm
M6 12 mm
M6 12 mm
(View from the side)
Depth of
screw
b
300 mm
300 mm
300 mm
300 mm
300 mm
15 mm
15 mm
15 mm
15 mm
15 mm
5