Cambridge Audio MI+ User Manual page 8

CHAPTER 3
The device screen appears
again, with the Learning icon
above the learn button.
The power button icon is
blinking, awaiting a signal from
your device's remote control.
Press the button of the device
that you want to program.
You can now start mapping
your device's remote control
buttons to the M1+ LCD
buttons. The power button is
the first button to be mapped.
While pointing your device's
remote control at the M1+
learning eye, press the device's
power button.
Blinking icon
Learning icon
1
1
POWER
POWER POWER POWER POWER
REMOTE
CONTROL
When you hear a beep and see
the OK icon, release the button.
The next button to be mapped
will start blinking.
Continue to press the buttons
on your device remote control
corresponding to the blinking
buttons on the M1+.
You can skip to any button by
pressing the button on the M1+
LCD panel...
... and then pressing the
corresponding button on your
device remote control. Or,
you can press a different device
button and configure it with
another remote control
When you have finished
mapping all the desired buttons
from your device remote
control to the M1+, press the
learn button. You hear three
beeps, and the M1+ exits the
.
learning function
8
CHAPTER 3
OK icon
Next
button
1
to be
mapped
1
1 1 1 1
1 1 1 1