Biowave GO Quick Start

Quick Start
Do not turn on unit until Step 7.
1.
Plug in the AC
charger into your
BioWaveGO unit to
charge up the battery.
(Takes about 1 hour.)
2.
biowave.com/start
Go to
about connecting the device to your
body, pad placement locations, use
during treatment and charging.
3.
Plug blue Pad
CONNECTORS
into blue
LEADWIRE CABLE
CONNECTORS.
4.
Find your PAD PLACEMENT PHOTO
for your specific pain condition in the
Quick Reference Guide or at:
biowave.com/start
Questions?
biowave.com/start
1-877-BIOWAVE x1
(1-877-246-9283, x1)
support@biowave.com
5.
6.
to learn
7.
8.
Clean your skin with
a damp washcloth in
the location the PADS
are placed. Apply Pain
Relief Pads directly
over areas of pain.
Plug LEADWIRE
CABLE into device
so it clicks in place.
Press Power Button
to turn unit on.
(AC Charger must
be disconnected
from unit.)
Press the PLUS
(+) button to start
treatment. Continue
to press the PLUS (+)
button throughout
treatment to keep a
strong but comfortable
sensation.