Sending A Network Fax With Bfp - Brother NC-130h Network User's Manual

Sending a Network Fax with BFP

From the application you wish to send the document from select File/Print. Ensure that the Brother Internet
Fax Driver is selected as shown below.
Click OK to start the BFP dialogue box. From this dialogue box you can either specify an address in the
address line or select a location from the address book. If you wish to type more than one location in the
address line make sure they are separated by ";".
Note
When entering a Fax Contact you must first specify the Internet Address of the machine that will send the
document followed by the fax number as shown below.
Mailmfc9650@brother.co.uk(fax#2537)
Brother Internet Fax Printing Software
10
10
101