Wired Controller - Konix Blue FFF Manual

A
SWITCH CONSOLE
1. Connect the Switch console stand to the TV and turn
console on.
2. Connect the controller by USB connector into the switch
console stand, press the A button to connect, and when it
is connected, the LED indicator will be lit.
NOTE:
Please enter "System Setting", then "Controllers and Sensors"
then set the "Pro Controller Wired Communication" to "ON"
status
Turbo can be set on the following buttons:
Y,X,B,A,R, ZR, L,ZL, D-Pad up, D-Pad down, D-Pad left, and
D-Pad right.
• Setting up TURBO functions
Press and hold the Turbo button, then the button for which you
want the turbo button to be active.
• Clear TURBO single function button
Press and hold the Turbo button, then double press the button
that has the turbo activated.
WIRED
CONTROLLER