Predelivery - HOLT HGW30 Manual

3. PREDELIVERY

This predelivery procedure must be performed and signed off
by a qualified Holt Industrial representative and Holt Industrial
trained owner, maintenance supervisor or operator at the time
of delivery and before going into service.
_________________________________________________
Owner / Owner Representative
_________________________________________________
Address
_________________________________________________
_________________________________________________
City, State/Province, Postal Code
_________________________________________________
Phone Number
_________________________________________________
Holt Industrial Representative
_________________________________________________
Phone Number
_________________________________________________
VIN Number
_________________________________________________
Delivery Date
The owner or owner representative is thoroughly trained on the
Holt Industrial HGW30 Stump Grinder. Predelivery inspection
has been performed. Safe operation, care, adjustments,
warranty policy and manuals for the HGW30 Stump Grinder
have been reviewed.
_________________________________________________
Owner / Owner Representative Signature
_________________________________________________
Date
_________________________________________________
Holt Industrial Representative Signature
_________________________________________________
Date
X Predelivery Inspection
Verify rotor turns freely.
Verify all fluids are at proper level.
Verify tires are properly inflated.
Verify all wheel lugs are tight.
Lubricate all grease fittings.
Verify all fasteners are tight.
Verify all decals are in installed.
Start engine and operate all functions to verify opera-
tion. Stop engine.
Check hoses and fittings for leaks.
HOLT HGW30 Stump Grinder Operator's Manual | 5